home *** CD-ROM | disk | FTP | other *** search
/ Atari Mega Archive 1 / Atari Mega Archive - Volume 1.iso / falcon / utils / blowup_d.lzh / readme.1st < prev    next >
Text File  |  1993-10-06  |  6KB  |  152 lines

  1. ************************************
  2. * ATTENTION! ATTENTION! ATTENTION! *
  3. * You MUST read this otherwise     *
  4. * your monitor could be destroyed! *
  5. ************************************
  6.  
  7. BlowUP030 Demoversion
  8.  
  9. This demo may be copied and passed to others for free as long as all the
  10. files, espacially this README remain unchanged!
  11.  
  12. BlowUP030 (c) Georg Acher & Michael Eberl
  13. =========================================
  14.  
  15. Warning:
  16. --------
  17. IF YOU HAVE A FIXED-FREQUENCIE MONITOR (E.G. A VGA OR SVGA) NEVER SELECT THE
  18. 'MS1/2' BUTTON IN BLOWCONF.PRG!!!!!
  19. ONLY IF YOU LEAVE THIS BUTTON UN-SELECTED IT IS ENSURED THAT YOUR MONITOR
  20. WON'T GET HORIZONTAL-FREQUENCIES THAT MIGHT DAMAGE IT!
  21.  
  22.  
  23. Short-Manual for the BlowUP030-Demo:
  24. ------------------------------------
  25.  
  26. Run BLOWCONF.PRG (the demo runs only in 16 colors and with the ATARI-VGA-
  27. adapter installed) and choose the monitor-type you are using:
  28.  
  29.  VGA:   fixed frequencies of
  30.         31.5kHz/60Hz
  31.  SVGA:  fixed frequencies of
  32.         31.5/35.5kHz /60Hz
  33.  MS1/2: multiscans, e.g.
  34.         15-38kHz/30-55kHz at 50-100Hz
  35.  
  36. Only with a multiscan you are able to configure your resulution live,
  37. because they are able to display all values in a certain range.
  38. For VGA/SVGA this might be very dangerous.
  39.  
  40. *
  41. *  All chnges can be returned to their
  42. *  original value with UNDO (or the
  43. *  return-key)
  44. *
  45.  
  46. LOAD CONF:  displays a list of predefined resolutins. In this list you
  47.             find the monitor-type it is suitable for. Select one and
  48.             confirm with OK to install the resolution.
  49. SAVE:       The resolution that is configured at the moment is saved into
  50.             the 'BLOWBOOT.PRG' file in the AUTO-folder of your boot-device
  51.             (usually C:).
  52.  
  53. *  ATTENTION:
  54. *  ----------
  55. *  BLOWBOOT.PRG has to be the last
  56. *  programm in the AUTO-folder
  57. *  (especially behind MultiTOS and
  58. *  NVDI). Select unsorted in the
  59. *  DESKTOP-menu to be sure
  60.  
  61. After the next RESET the new resolution will be used if you boot in
  62. 16 colors. If you do not, use the DESKTOP-menu to switch to 16 colors.
  63.  
  64. The special ability of the BlowUP030-system is that you are able
  65. to configure the video-parameters very free. Vertical and horizontal
  66. Screen-position, left, right, upper and lower margin, interlace-mode and
  67. pixel-clock might be set freely (in certain margins given by the
  68. Falcon-hardware) TO TAKE OUT THE BEST OF YOUR MONITOR.
  69. If you have a multiscan and selected then MS1/2-mode you are able to find
  70. the maximum - step-by-step.
  71.  
  72. With BLOWCONF you are able to install two resolutions for every color-depth.
  73. BLOWACC enables you to select which one or even if one of the new
  74. resolutions is used.
  75.  
  76. The SCREEN-SAVER is the newest feauture of BlowUP030:
  77. If it is active it speeds up the Falcon at up to 70% (depending on the
  78. Color-mode and resolution). There is an option to start screen-
  79. saving (and ACCELERATION) immediately by moving the mous to the left border
  80. and stopping there (takes about 1-2 seconds).
  81.  
  82. Attention: The saver is not compatible with very hardware-depending
  83. programms like TEMPELMON that need V-blanks or use interrup 6.
  84.  
  85.  
  86. LIMITATIONS OF THE demo-version against
  87. the sold-versions (SV)
  88. ---------------------------------------
  89.  
  90. - only works in 16 colors                            (SV: 2,4,16,256 & TC)
  91. - SV runs on SM124-monitors too
  92. - fewer standard-configurations
  93.   than in the SV
  94. - left & right margin changeable
  95.   only in steps of 10                                (SV: 2)
  96. - upper & lower margin changeable
  97.   only in steps of 5                                 (SV: 1)
  98.   (you might not get that high resolutions
  99.   out of your monitor as with the SV
  100.   because of this)
  101. - Virtual-screen only up to 768*768                  (not limited by the SV)
  102. - Pixel-clock only 25 & 32                    (SV with hardware up to 50MHz)
  103. - SV has a 30-page manual with
  104.   "Tips & Tricks incluced" (ST-Magazin 8/93)
  105.  
  106. And now the prices for the full feautured BlowUP030:
  107.  
  108. Soft-only:  29DM
  109. Hard-1:     99DM (for multiscans)
  110. Hard-2:    129DM (more flexible to be
  111.                  used on unflexible
  112.                  monitors like VGA/
  113.                  SVGA or SM124)
  114.  
  115. These are prices for within Germany (+p&p). Ask for prices outside Germany.
  116.  
  117. Upgrade from Soft-only to a hardware-version is possible.
  118.  
  119. For multiscans Hard-1 can take out the best of your Falcon - other companies
  120. might call the 50MHz-pixel-clock 'pro' - for us its simply STANDARD.
  121. Only with VGA and SM124- monitors, where certain frequencies have to be
  122. kept you will need Hard-2.
  123.  
  124. Here some exampels for possible resolutions:
  125. ============================================
  126. 640*480, 2-16 colors, 110-124Hz n.i.
  127. 880*608, 2-16 colors, 69-76Hz   n.i.
  128. 1024*768,2-16colors,  100-104Hz i
  129. 1280*960,2-16 colors, 67-69Hz   i
  130. 640*480, 256 colors,  76-80Hz   n.i.
  131. 880*608, 256 colors,  48-50Hz   n.i.
  132. 880*608, 256 colors,  94-100Hz  i
  133. 1024*768,256 colors,  65-67Hz   i           (at 27kHz hor.-frequencie)
  134. 480*480, TC        ,  57Hz      n.i.
  135.  
  136.  
  137. For further information and orders write to:
  138. ============================================
  139.  
  140. Acher & Eberl & Seibert GbR      (e-mail: acher@informatik.tu-muenchen.de
  141. Eslarner Str.34                           eberl@informatik.tu-   ...
  142. D-81549 Muenchen                    or    seibert@informatik.tu- ... )
  143. Germany
  144.  
  145. or (for the UK)
  146. ssolutions@cix.compulink.co.uk
  147. (System Solutions, London)
  148.  
  149. or (for the US)
  150. Lexicor@world.std.com resp. drnibble@wpi.WPI.EDU
  151.  
  152. ə